Home > surge protective device for power supply1 >

DIN surge filter, surge protective device

Product Categories

lightning even counter [4]
MODULAR THERMALLY PROTECTED MOV [2]
surge protective device box type [1]
surge protective device for power supply system [27]
surge protective device for information system [9]
surge protective device for power supply1 [29]

Prosurge Electronics Co.,Ltd.

Contact Now

DIN surge filter, surge protective device

Brand Name : Prosurge

Certification : CE, ISO 9001-2008

Model Number : DSF10/320-10A/3P/C

Place of Origin : Guangdong

Price : 0-50USD

Delivery Time : 25~30 days lead time

Payment Terms : T/T

Supply Ability : 50000pecs/month

Packaging Details : c

Contact Now

HIT, Prosurge made surge protective device especially for lowvoltage power supply system surge protection at the boundaries from lightning protection zone 2-3 and higher.

Ø Class III (D) surge protector in accordance with IEC61643-11 and UL1449-3rd

Ø Series type SPD/surge power filter with rated load current 10A, max discharge current 20kA 8/20 per phase

Ø Single phase surge protection

Ø High energy MOV(Metal Oxide Varistor) inside

Ø Interference suppressor filter >40dB @ 1MHz

Ø Low voltage protection level

Ø Failure indication by LED

Ø Fast response

Type		DSF10/xxx-10A/3P/C
		175	320
In accordance with		IEC61643-11:2011; UL1449 3rd
Category IEC/VDE		III / D
Nominal Voltage Un		100-130V 1∮2W	200-250V 1∮2W
Max. continuous operating voltage (AC)		175	320
Current rating – Max.continuous		10A
Protection modes		Line-Neutral, Line-Earth, Neutral-Earth
Nominal discharge current(8/20) In/mode		5kA
Max. discharge current(8/20) Imax/mode		10kA
Max. discharge current(8/20) Imax/phase		20kA
Voltage protection level(L-N)	@In	<0.8kV	<1.2kV
	@VPR	<0.7kV	<1.0kV
Temporary overvoltage - TOV		195VAC	370VAC
Filter attenuation		>40dB @ 1MHz
Internal protection (fusing)		Thermal fusing on primary MOVs
External disconnector requirements		10A HRC fuse
Environment		-10 to 60°C, 0 to 90%RH (non-condensing)
Cross-section of connection wire		multi-strand 1.3- 2.5mm2
Mounting		35mm DIN-rail in accordance with EN 50022/DIN46277-3
Enclosure material		thermoplastic; extinguishing degree UL94 V-0
Degree of protection		IP20
Indicators		LED Alarm, Green - Normal, lED off - fail
Dimensions		80(L)×25(W)×85(H)

DIN surge filter, surge protective device Manufactures

DIN surge filter, surge protective device Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Prosurge Electronics Co.,Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!